ZTE GTGH Pon port 16ports GPON Card Transmission distance 20KM
Contact Person : Anna
Phone Number : +852 68416561
WhatsApp : +85268416561
|Model NO.:||MCUD||Optical Connector:||SC/PC|
|Transport Package:||Carton Box||Specification:||45cm * 32cm * 8cm|
|Port:||Yantian, China||Type:||H801mcud Uplink Card|
|Condition:||New||Application:||Ma5608t Gpon/Epon Olt|
|Uplink Interface:||1ge, Ge Fiber Interface|
Original Control 1GE uplink OLT GPON board H801 MCUD (GE Uplink) H801 MCUD01 for Huawei SmartAX MA5608T
|MA5608T mini olt shelf plan|
|FAN||1 Service card slot|
|2 Service card slot|
|3 Mail control unit board||4 Mail control unit board||5 Power input card|
|Mail control unit card|
|Uplink 1GE interfaces||Uplink 10GE interfaces||Other|
|MCUD||4||0||ETH ALARM IN/OUT CONSLE/ESC AUX |
|MCUD1||2 SFP||2 sfp|
|GPBD||8-port GPON OLT interface board|
|GPBH||8 Ports Advanced GPON OLT Interface Board|
|GPFD||16-port GPON OLT interface board|
|XGBC||4-port 10G GPON OLT Interface Board|
|EPSD||8-port EPON OLT Interface Board|
|XEBD||8-port 10G EPON OLT Interface Board|
|OPGD||48-port FE P2P Access Board(OPGD+24*CSFP/FE)|
|ETHB||8 port GE uplink board|
|TOPA||TDM processing board|
The MA5608T has a strong adaptability to the environment and can be deployed quickly. In FTTx networks, the OLT is moved closer to the user side, which can save backbone optical cable resources. This solves the problem of a few users and long access distance, when FTTx services are applied in an area with a low population density.
Supports a split ratio of 1:128.
Support small form-factor pluggable (SFP) optical module of Class B+ or Class C+ and XFP optical module, which can be used in different scenarios.
High-density 48 single-fiber bi-directional or 24 two-fiber bi-directional GE/FE P2P optical access is supported.
Supports the high-performance and large-capacity control board SCUH. In active/standby mode, SCUH supports 20 Gbit/s switching bandwidth for each slot. In load sharing mode, SCUH supports 40 Gbit/s switching bandwidth for each slot. And provides 960G switching capacity (doubles performance capacity), improving access user bandwidth.
Supports the High-Performance Multicast Service. The device employs the multicast technology to provide IP video services, including live TV and QVoD, for carriers. By introducing the multicast technology, the network device can manage, control, and forward IP video services and thus meets carriers' requirements for provisioning IP video service.
The MA5600T/MA5603T/MA5608Thas completed its interoperability test with all mainstream NGN/IMSs.Implements base station access solution by using MA5600T/MA5603T/MA5608T (OLT)+MDU. And the MA5600T/MA5603T/MA5608T supports clock synchronization in the base station access scenario.
Connection to the NGN/IMS network through SIP or H.248, implementing the VoIP service (including the voice, fax, and modem services).
The MA5600T/MA5603T/MA5608T supports reconstruction of traditional voice devices such as the N*64K private line device and ISDN PRI PBX, implementing the ALL IP architecture.
The MPLS PWE3 provides the E2E reliability and quality assurance for the service.
The MA5600T/MA5603T/MA5608T features powerful access and convergence capability. In the downstream direction, it supports cascading to other devices through the GE or 10GE port. In the upstream direction, it supports connection to the IP/MPLS network through the GE or 10GE port. It also supports dual homing to the BRAS through direct connection.
Centric Management for GE Remote Extended Subracks in FTTB or FTTC Scenarios
The MA5600T/MA5603T supports the centric management for GE remote extended subracks in FTTB or FTTC scenarios so that the network features higher scalability. The GE remote extended subrack feature uses new technologies such as VDSL2 and vectoring on the copper line network to deploy ultra-broadband networks more conveniently and rapidly.
The MA5600T/MA5603T/MA5608T supports the fiber to the home (FTTH) network application. It can be connected to the ONT in the user's house through the PON port or provide the P2P optical access service through the FE or GE port.
The MA5600T/MA5603T/MA5608T supports the fiber to the building (FTTB) network application, and is connected to the ONU (MDU or ONT) that is deployed in the corridor through the PON port.
The MA5600T/MA5603T/MA5608T supports the fiber to the curb (FTTC) network application, connected to the ONU that is deployed at the curb through the PON port, or connected to the DSLAM that is deployed at the curb through the GE optical port.
Centric Management for GE Remote Extended Subracks Networking
Leased Line Service (Enterprise Access)
Leased Line Service (Base Station Access)
The MA5600T/MA5603T/MA5608T supports multiple copper access modes such as ADSL2+, VDSL2, and SHDSL.
Voice Service Network Application
The MA5600T/MA5603T/MA5608T supports the voice service network application. The MA5600T/MA5603T/MA5608T can function as an AG (Access Gateway) in the softswitch network to provide the voice service and transmit the voice service to the IMS network. In addition, the MA5600T/MA5603T/MA5608T supports the TDM SHDSL access, which is applicable to reconstruction of the traditional voice network.
Enter Your Message